Product name: TXM-EX-WA (A/N)D vehicle-mounted explosion-proof camera
Product model: TXM-EX-WAAD [Simulation of aluminum alloy]
TXM-EX-WAND [Aluminum Alloy Network]
Manufacturing standard:
Gb3836.1-2010 Electrical Equipment for Explosive gas Environments -- Part 1: General Requirements
Gb3836.2-2010 Electrical Equipment for Explosive Gas Environment -- Part 2: Flameproof type "D"
Electrical equipment for The Environment with Combustible dust - Part 1 / Part 5: General requirements, Enclosure protection type "tD"
Explosion-proof marks: Exd Ⅱ CT6Gb/ExtD A21 IP68 T80 ℃
Product features
● Small size, light weight, flexible installation, can be used with GPS, vehicle-mounted DVR, dashcam, etc., as a dangerous goods logistics transport monitoring system image acquisition tool;
● 5 megapixel 1/2.5"CMOS sensor,1 megapixel / 1.3 megapixel /2 megapixel effective pixel, coupled with faster computing speed digital processor, can rapidly compress larger and clearer picture size;
● Match the advanced operating system video compression algorithm, make the image transmission more smooth and display more clear and exquisite;
● Support remote image access through a browser (Internet Explore), support dynamic IP address, easy to realize the network transmission of images;
●3D digital noise reduction technology, increase the noise reduction processing of the original signal, the image at night is clean and bright;
● Infrared visual distance of 20-30 meters, even in the case of poor light can still obtain high-quality images;
● Optical grade high-strength, high-light transmittance, ultra-white explosion-proof glass, light pass rate higher than 96%, completely eliminate the halo of infrared lamp;
● Nano invisible wiper, not sticky water, not sticky oil, dust repellent;
● Aviation grade aluminum alloy seiko or high-quality 304 stainless steel seiko manufacturing, explosion-proof, dustproof, waterproof;
● The surface adopts special anodic process to form a high strength protective film, which is strong and wear-resisting, never fading and has mild corrosion resistance.
model | TXM-EX-WA(A/N)D | |
certification | ||
Explosion-proof marks | ExdⅡCT6Gb/ExtD A21 IP68 T80℃ | |
Explosion-proof certificate No | CNEx16.2999 | |
Mechanical properties of | ||
The material | Aluminum alloy or 304 stainless steel | |
Surface treatment | Aluminum alloy anode or stainless steel primary color, optional electric polishing | |
Protection grade | IP68 | |
The interface specification | G-1/2" | |
The weight of the | ≤1.5kg [aluminum alloy], ≤3.0kg [stainless steel] | |
installation | wall | |
Electrical performance | ||
The input voltage | DC12V | |
Working current | ≤2000mA | |
The camera | Imaging device |
5 megapixels 1/2.5 "CMOS sensor (network) 1/3Sony Super EFFIO HAD/Exview HADII CCD Sensor(simulation) |
Effective pixels |
1.3 megapixels /2 megapixels (network) 700TVL(simulated) 2 million 1080P(coaxial HD) [SUPPORT AHD/HDCVI or HDTVI format] |
|
The lens | 2.8mm/4mm/6mm/8mm/12mm/16mm | |
Signal to noise ratio | >52db | |
Minimum illumination | 0Lux(infra-red on) | |
紅外 | distance | 30m/60m |
The wavelength | 850nm | |
On/off | Auto(≤10Lux) | |
Electrical connection | Compound cable (network + power supply), or network cable, power supply separate outlet | |
The environment | ||
The environment temperature | (-30℃,+70℃) | |
The atmospheric pressure | 80-106KPa | |
Relative humidity |
≤95%RH(+25℃) |